240SX S13 S14 1989-1998 Wilwood Clutch Master Cylinder Adapter for LS Swap
DESCRIPTION
When doing a conversion or simply upgrading your clutch master cylinder to a Wilwood option, you will find the PCD is not the same as the OEM S/R chassis'.
The GKTECH Wilwood master cylinder adapter simply allows you to do so while taking up as little room as possible.
This little bad boy measures 6mm thick and also comes with countersunk allen key bolts and a clevis to suit your desired master cylinder. This listing does not include the master cylinder.
We have also included the option of two different master cylinders that we recommend. We suggest double checking the measurements supplied to ensure there are no clearance issues between the master cylinder and the engine.
Vehicle Compatibility:
- Nissan S13 240sx
- Nissan S13 Silvia
- Nissan S14 240SX
- Nissan S15 Silvia
- Nissan Skyline R32 GTS-T
- Nissan Skyline R33 GTS-T
- Nissan Skyline R34 GTT
- Nissan C33
- Nissan C34
- Nissan C35
- Nissan A31 Cefiro
FAQ'S
Will this fit my car?The adapter plate is made to suit both S/R chassis' as do the Wilwood master cylinders with our clevis.What's the advantage of using the Gktech master cylinder adapter?This part allows you to bolt up the trusted Wilwood clutch master cylinders, when doing a conversion or want to upgrade your existing one.What modifications are required, is this hard to fit?No modifications are required, this is a direct fit.Is there anything else needed for installation?You will need to ensure you use the correct lines which we do sell as an option, but in terms of the plate itself will arrive as shown in the product photo.Can I install this myself? If so how long will installation take?Yes, the plate is very easy to install. Simply fit the plate and the clutch master. Then you will need to top up the clutch fluid and bleed the clutch system.
More Information
| Bullet Point 1 | One stop solution for LS swapped 350Z/G35 |
|---|---|
| Bullet Point 2 | Allows increased clutch master cylinder bore displacement for T56 or aftermarket slave |
| Manufacturer Part Number | CLCH-ADPT |
| Weight | 2.000000 |
| ICT Manufacturer | GK Tech |
| Length Inches | 3 |
| Width Inches | 2 |
| Height Inches | .5 |
| Download .PDF for Vehicle | No |
WARNING - This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.
STEEL (steel bolts): Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.